Disclaimer: The information on this page has not been checked by an independent person.   Use this information at your own risk.
ROYMECHX clone of ROYMECH


These Pages include various standards. To confirm the status of any standard, identify the replacement standard if it is obsolete and/or purchase the standard please use.
BSI Shop
It is also possible to become a BSI member and obtain copies of the Standards at much reduced prices.


Home
Standards Index

Standards and Regulations Useful to Mechanical Engineers (English)

European Based Steel Standards

- Standard Reference Title
Material Standards
1 BS EN 39:2001 Loose Steel Tubes for Tube and Coupler Scaffolds.
2 BS EN 10016-1:1995 Non-alloy steel rods for drawing and/or cold rolling. General requirements
2 BS EN 10016-2:1995 Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for general purpose rod
- BS EN 10016-3:1995 Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rimmed and rimmed substitute low carbon steel rod
- BS EN 10016-4:1995 Wrought Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rod for special applications
3 BS EN 10025:1993 Hot rolled products of non-alloy structural steels. Technical delivery conditions
4 BS EN 10027-1: 1992 Designation Systems for Steel : Part 1 Steel Names, Principal Symbols
- BS EN 10027-2: 1992 Designation Systems for Steel : Part 2 Steel Numbers
5 BS EN 10028-1:2000 Specification for flat products made of steels for pressure purposes. General requirements
- BS EN 10028-2:2003 Specification for flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties
- BS EN 10028-2:2003 Flat products made of steels for pressure purposes -
Part 2. Non-alloy and alloy steels with specified elevated temperature properties
- BS EN 10028-3:2003 Specification for flat products made of steels for pressure purposes.
Part 3.Weldable fine grain steels, normalized
- BS EN 10028-4:2003 Flat products made of steel for pressure purposes
Part 4. Nickel alloy steels with specified low temperature propertie
- BS EN 10028-5:2003 Flat products made of steel for pressure purposes
Part 5. Weldable fine grain steels, thermomechanically rolled
- BS EN 10028-6:2003 Flat products made of steel for pressure purposes
Part:6 Weldable fine grain steels, quenched and tempered
- BS EN 10028-7:2003 Flat products made of steels for pressure purposes
- Part 7: Stainless steels
6 BS EN 10029: Tolerances on Hot Rolled steel plate sections 3mm thick or over
7 BS EN 10055:1996 Hot rolled steel equal flange tees with radiused root and toes. Dimensions and tolerances on shape and dimensions
8 BS EN 10056-1:1999 Specification for structural steel equal and unequal angles. Dimensions
9 BS EN 10079 Definition of Steel Products
10 DD ENV 10080:1996 Steel for the reinforcement of concrete
11 BS EN 10083-1:1991 Quenched and tempered steels:Technical delivery conditions for special steels
- BS EN 10083-2:1991 Quenched and tempered steels: Technical delivery conditions for unalloyed quality steels
- BS EN 10083-3:1996 Quenched and tempered steels: Technical delivery conditions for boron steels
12 BS EN 10084:1998 Case hardening steels - Technical delivery conditions
13 BS EN 10085:2001 Nitriding steel. Technical delivery conditions
14 BS EN 10087:1999 Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods
15 BS EN 10088-1:1995 Stainless steels. List of stainless steels
- BS EN 10088-2:1995 Stainless steels. Technical delivery conditions for sheet/plate and strip for general purposes
- BS EN 10088-3:1995 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes
16 BS EN 10089:2002 Hot rolled steels for quenched and tempered springs. Technical delivery conditions.
17 BS EN 10090:1998 Valve steels and alloys for internal combustion engines
18 BS EN 10095:1999 Heat resisting steels and nickel alloys
19 BS EN 10106:1996 Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state
20 BS EN 10107:1996 Grain oriented electrical steel sheet and strip delivered in the fully processed state
21 BS EN 10111:1998 Continuously hot rolled low carbon steel sheet and strip for cold forming
22 BS EN 10113-2:1993 Hot rolled products in weldable fine grain structural steel
- BS EN 10113-3:1993 Hot rolled products in weldable fine grain structural steel
23 BS EN 10120:1997 Steel sheet and strip for welded gas cylinders
24 BS EN 10131:1991 Cold-rolled uncoated low carbon and high yield strength steel flat products for cold forming.   Tolerances on dimensions and shape
25 BS EN 10126:1996 Cold rolled electrical non-alloy steel sheet and strip delivered in the semi-processed state
26 BS EN 10130:1999 Cold rolled low carbon steel flat products for cold forming
27 BS EN 10132-2:2000 Cold rolled narrow steel strip for heat treatment
- BS EN 10132-2:2000 Cold rolled narrow steel strip for heat treatment
- BS EN 10132-3:2000 Cold rolled narrow steel strip for heat treatment
- BS EN 10132-4:2000 Cold rolled narrow steel strip for heat treatment
28 BS EN 10137-2:1996 Plates and wide flats made of high yield strength structural steel
- BS EN 10137-3:1996 Plates and wide flats made of high yield strength structural steel
29 BS EN 10139:1998 Cold rolled uncoated mild steel narrow strip for cold forming
30 BS EN 10142:2000 Continuously hot dip zinc coated mild steel strip and sheet for cold forming
31 BS EN 10147:2000 Continuously hot dip zinc coated steel strip and sheet
32 BS EN 10149-2:1996 Hot rolled flat products made of high yield strength steels for cold forming
- BS EN 10149-3:1996 Hot rolled flat products made of high yield strength steels for cold forming
33 BS EN 10151:2002 Stainless steel strip for springs
34 BS EN 10152:1994 Electrolytically zinc coated cold rolled steel flat products
35 BS EN 10152:2003 Electrolytically zinc coated cold rolled steel flat products for cold forming
36 BS EN 10154:2002 Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet
37 BS EN 10155:1993 Structural steel with improved atmospheric corrosion resistance
38 BS EN 10165:1996 Cold rolled electrical alloy steel sheet and strip delivered in the semi processed state
39 BS EN 10202:2001 Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
40 BS EN 10205:1992 Cold reduced black plate in coil form for the production or tinplate or electrolytic chromium/chromium oxide coated steel
41 BS EN 10207:1992 Steels for simple pressure vessels
42 BS EN 10208-1:1998 Steel pipes for pipelines for combustible fluids
43 BS EN 10208-2:1997 Steel pipe for pipelines for combustible fluids. Technical delivery conditions
44 BS EN 10209:1996 Cold rolled low carbon steel flat products for vitreous enamelling
45 BS EN 10210-1:1994 Hot finished structural hollow sections of non-alloy and fine grain structural steels. Technical delivery requirements
- BS EN 10210-2:1997 Hot finished structural hollow sections of non-alloy and fine grain structural steels. Tolerances, dimensions and sectional properties
46 BS EN 10213-2:1996 Technical delivery conditions for steel castings for pressure purposes
- BS EN 10213-3:1996 Technical delivery conditions for steel castings for pressure purposes
- BS EN 10213-4:1996 Technical delivery conditions for steel castings for pressure purposes
- BS EN 10214:1995 Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet
47 BS EN 10215:1995 Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet
48 BS EN 10216-1:2002 Seamless tubes for pressure purposes - Non-alloy steel tubes with specified room temperature properties">
- BS EN 10216-2:2002 Seamless tubes for pressure purposes - Non-alloy and alloy steel tubes with specified elevated temperature properties
- BS EN 10216-3:2002 Seamless tubes for pressure purposes - Alloy fine grain steel tubes
- BS EN 10216-4:2002 Seamless tubes for pressure purposes - Non-alloy and alloy steel tubes with specified low temperature properties
49 BS EN 10217-1:2002 Welded steel tubes for pressure purposes - Non-alloy steel tubes with specified room temperature properties
- BS EN 10217-2:2002 Welded steel tubes for pressure purposes - Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
- BS EN 10217-3:2002 Welded steel tubes for pressure purposes - Alloy fine grain steel tubes
- BS EN 10217-4:2002 Welded steel tubes for pressure purposes - Electric welded non-alloy steel tubes with specified low temperature properties
- BS EN 10217-5:2002 Welded steel tubes for pressure purposes - Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
- BS EN 10217-6:2002 Welded steel tubes for pressure purposes - Submerged arc welded non-alloy steel tubes with specified low temperature properties
50 BS EN 10219-1:1997 Cold formed welded structural hollow sections of non-alloy and fine grain steel
51 BS EN 10222-1:1998 Steel forgings for pressure purposes. General requirements for open die forgings
- BS EN 10222-2:2000 Steel forgings for pressure purposes. Ferritic and martensitic steels with specified elevated temperature properties
- BS EN 10222-3:1999 Steel forgings for pressure purposes. Nickel steels with specified low-temperature properties
- BS EN 10222-4:1999 Steel forgings for pressure purposes. Weldable fine-grain steels with high proof strength
- BS EN 10222-5:2000 Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels
52 BS EN 10224:2002 Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption
53 BS EN 10225:2001 Weldable structural steels for fixed offshore structures. Technical delivery conditions
54 BS EN 10248-1:1996 Hot rolled sheet piling of non-alloy steels
55 BS EN 10249-1:1996 Cold formed sheet piling of non-alloy steels
56 BS EN 10250-2:1999 Open die steel forgings for general engineering purposes
- BS EN 10250-3:1999 Open die steel forgings for general engineering purposes
- BS EN 10250-4:1999 Open die steel forgings for general engineering purposes
57 BS EN 10253-1:1999 Butt welding pipe fittings
58 BS EN 10263-2:2001 Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working
59 BS EN 10224:2002 Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption. Technical delivery conditions
60 BS EN 10225:2001 Weldable structural steels for fixed offshore structures. Technical delivery conditions
61 BS EN 10248-1:1996 Hot rolled sheet piling of non alloy steels. Technical delivery conditions
62 BS EN 10249-1:1996 Cold formed sheet piling of non alloy steels. Technical delivery conditions
63 BS EN 10250-1:1999 Open steel die forgings for general engineering purposes. General requirements
- BS EN 10250-2:1999 Open steel die forgings for general engineering purposes. Non-alloy quality and special steels
- BS EN 10250-3:1999 Open steel die forgings for general engineering purposes. Alloy special steels
- BS EN 10250-4:1999 Open steel die forgings for general engineering purposes. Stainless steels
64 BS EN 10253-1:1999 Butt-welding pipe fittings. Wrought carbon steel for general use and without specific inspection requirements
65 BS EN 10263-1:2001 Steel rod, bars and wire for cold heading and cold extrusion. General technical delivery conditions
- BS EN 10263-2:2001 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels not intended for heat treatment after cold working
- BS EN 10263-3:2001 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for case hardening steels
- BS EN 10263-4:2001 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels for quenching and tempering
- BS EN 10263-5:2001 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for stainless steels
66 BS EN 10264-1:2002 Steel wire and wire products. Steel wire for ropes. General requirements
- BS EN 10264-2:2002 Steel wire and wire products. Steel wire for ropes. Cold drawn non alloy steel wire for ropes for general applications
- BS EN 10264-3:2002 Steel wire and wire products. Steel wire for ropes. Round and shaped non alloyed steel wire for high duty applications
- BS EN 10264-4:2002 Steel wire and wire products. Steel wire for ropes. Stainless steel wire
67 BS EN 10265:1996 Magnetic materials. Specification for steel sheet and strip with specified mechanical properties and magnetic permeability
68 BS EN 10267:1998 Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures
69 BS EN 10268:1999 Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming. General delivery conditions
70 BS EN 10269:1999 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties.
71 BS EN 10270-1:2001 Steel wire for mechanical springs. Patented cold drawn unalloyed spring steel wire
- BS EN 10270-2:2001 Steel wire for mechanical springs. Oil hardened and tempered spring steel wire
- BS EN 10270-3:2001 Steel wire for mechanical springs. Stainless spring steel wire
72 BS EN 10271:1999 Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions
73 BS EN 10272:2000 Stainless steel bars for pressure purposes
74 BS EN 10273:2000 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
75 BS EN 10277-1:1999 Bright steel products. Technical delivery conditions. General
- BS EN 10277-2:1999 Bright steel products. Technical delivery conditions. Steels for general engineering purposes
- BS EN 10277-3:1999 Bright steel products. Technical delivery conditions. Free cutting steels
- BS EN 10277-4:1999 Bright steel products. Technical delivery conditions. Case-hardening steels
- BS EN 10277-5:1999 Bright steel products. Technical delivery conditions. Steels for quenching and tempering
76 BS EN 10279:2000 Hot rolled steel channels. Tolerances on shape, dimension and mass
77 BS EN 10283:1999 Corrosion resistant steel castings
78 BS EN 10295:2002 Heat resistant steel castings
79 BS EN 10296-1:2003 Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Non-alloy and alloy steel tubes
80 BS EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Non-alloy and alloy steel tubes
81 BS EN 10302:2002 Creep resisting steels, nickel and cobalt alloys
82 BS EN 10304:2001 Magnetic materials (iron and steel) for use in relays
83 BS EN 10305-1 : 2002 Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes
- BS EN 10305-2 : 2002 Steel tubes for precision applications. Technical delivery conditions. Welded cold drawn tubes
- BS EN 10305-3 : 2002 Steel tubes for precision applications. Technical delivery conditions. Welded cold sized tubes
- BS EN 10305-4:2003 Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes for hydraulic and pneumatic power systems
- BS EN 10305-5:2003 Steel tubes for precision applications. Technical delivery conditions. Welded and cold sized square and rectangular tubes
84 BS EN 10331:2003 Magnetic materials. Specification for sintered soft magnetic materials
85 PD 970:2001 Wrought steels for mechanical and allied engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels- to replace BS 970-1 :1996
86 BS EN 25817:1992, ISO 5817:1992 Arc Welded joints in steel: guidance on quality levels for imperfections

Page Under Construction

Home
Standards Index

Send Comments to Roy Beardmore

Last Updated 25/01/2013