Disclaimer: The information on this page has not been checked by an independent person.   Use this information at your own risk.
ROYMECHX clone of ROYMECH

Click arrows to page adverts



These Pages include various standards. To confirm the status of any standard, identify the replacement standard if it is obsolete and/or purchase the standard please use.
BSI Shop
It is also possible to become a BSI member and obtain copies of the Standards at much reduced prices.

Home
Steel Section Index

Long Stalk Structural Tees...BS 4-1:1971 (Superseded by BS 4: 1993)

Please don't use for new designs

Dimensions
M = Mass per m , A= Width of Section, B= Depth of Section,T= Flange Thickness, T1 = Top Web thickness,
T2 = Bottom Web thickness, R1 = Root radius, R2 Toe Radius Area = Area of Section, S = Slope Inside Flange


Serial Size M A B Thickness R1 R2 Area
T T1 T2
mm kg mm mm mm mm mm mm mm cm2
127 x 254 35.42 127.0 254.0 18.3 9.4 8.9 13.5 6.6 45.35
102 x 203 25.02 101.6 203.2 16.3 8.4 7.9 12.2 7.6 31.93
89 x 178 20.42 88.9 177.8 15.2 7.9 7.4 11.2 6.4 26.06
76 x 152 16.30 76.2 152.4 14.2 7.4 6.9 10.2 6.4 20.90
64 x 127 12.62 63.5 127.0 13.4 6.9 6.4 8.9 5.1 16.13
44 x 114 7.44 44.5 114.3 9.5 5.1 5.1 7.6 3.8 9.48
25 x 76 3.65 25.4 76.2 6.4 4.4 4.4 5.1 3.8 4.64


This Page is being developed

Home
Steel Section Index

Send Comments to Roy Beardmore

Last Updated 04/04/2006