Disclaimer: The information on this page has not been checked by an independent person.   Use this information at your own risk.
ROYMECHX clone of ROYMECH

Click arrows to page adverts



These Pages include various standards. To confirm the status of any standard, identify the replacement standard if it is obsolete and/or purchase the standard please use.
BSI Shop
It is also possible to become a BSI member and obtain copies of the Standards at much reduced prices.

Home
Steel Section Index

Tee Bars...BS 4-1:1971 (Superseded by BS 4: 1993)

Please don't use for new designs

Dimensions
M = Mass per m , A= Width of Section, B= Depth of Section, T = Flange/Web Thickness, R1 = Root radius, R2 = Toe Radius. Area = Area of Section, S = Slope Inside Flange
Serial Size M A B T Radius Area
R1 R2
mm kg mm mm mm mm mm cm2
152 x 152 36 152.4 152.4 15.9 12.2 8.6 45.97
152 x 152 29 152.4 152.4 12.7 12.2 8.6 37.23
152 x 152 30 152.4 101.6 15.9 10.7 7.4 37.94
152 x 102 24 152.4 101.6 12.7 10.7 7.4 30.78
152 x 76 22 152.4 76.2 12.7 9.9 6.9 27.55
152 x 76 16 152.4 76.2 9.5 9.9 6.9 21.02
127 x 102 22 127.0 101.6 12.7 9.9 6.9 27.55
127 x 102 16 127.0 101.6 9.5 9.9 6.9 20.96
127 x 76 19 127.0 76.2 12.7 9.1 6.4 24.32
127 x 76 15 127.0 76.2 9.5 9.1 6.4 28.58
102 x 102 19 101.6 101.6 12.7 9.1 6.4 24.25
102 x 102 15 101.6 101.6 9.5 9.1 6.4 18.51
102 x 76 16 101.6 76.2 12.7 8.4 5.8 21.02
102 x 76 13 101.6 76.2 9.5 8.4 5.8 16.13
76 x 76 11 76.2 76.2 9.5 7.6 5.3 13.67
64 x 64 9 63.5 63.5 9.5 6.9 4.8 11.22
64 x 64 6 63.5 63.5 6.4 6.9 4.8 7.74
51 x 51 5 50.8 50.8 6.4 6.1 4.3 6.06
38 x 38 4 38.1 38.1 6.4 5.3 3.8 4.45


This Page is being developed

Home
Steel Section Index

Send Comments to Roy Beardmore

Last Updated 26/07/2005